E-2010 Central Station Control
From Whelen Engineering CompanyEncoder/Decoder
New Page 1
E-2010
CENTRAL STATION CONTROL
Control
and monitor your siren warning system from a central location. The E2010 allows the user
to issue system activations and collect remote siren status via RF link or landline.
Features
Whelen’s field proven COMM/STAT™
Command
and Status Monitoring protocol, for fast, secure, and reliable communication. The E2010
supports all of the features that are available in Whelen’s High-Power Voice and
Siren product line, from individual Command selection to user programmed command scenarios
or Call Keys. With the selection of one Call Key, an operator may prompt the encoder to
issue multiple commands. With the included computer accessory software, you can connect
the E2010 to a PC for Windows®
based
programming and data archiving. Data is available through an ACCESS®
data
base.
GENERAL
The
E2010 Central Station Control is configured to make maximum use of Call Keys or
preprogrammed scenarios. In addition, commands are grouped into easy to follow categories
for Warning Tones, Digital Voice Messages, Direction (if applicable) and Status. A numeric
keypad section allows for individual remote siren addressing. A 4 line by 40 character LCD
display shows all Keyboard and Status activity. Command and Status information are also
sent to a printer port and a serial communication port for a PC. All preprogrammed
functions are stored in non-volatile memory. Time and date are protected by internal,
rechargeable batteries. A keylock is available to disable the keyboard, but all status
information is still active.
E2010 FEATURES
- 4 line by 40
character backlit,
- LCD display
- 16 “HOT”
Call Keys
- 40 Auxiliary Call
Keys
- 2 Time-Of-Day Call
Key Activations
- 4 Remote Input
Call Keys
- Automatic System
Polling
- Internal Alarm
Tone
- 2 Contact Closure
Outputs for Alarms
- Base Radio
Interface
- Channel Grant
Input for Trunking
- Radio Systems
- Optional FSK
Signaling
- Security Keylock
- Printer Port
- Battery Backup for
Time and Date
- Rugged, Membrane
Keyboard
- Microphone for
Public Address E2010
COMPUTER
INTERFACE FEATURES
- CD-ROM and 9 Pin
“D” Cable included
- “Windows®”
Based Call Key Programming
- Add Call Key
Descriptions
- Hard Drive Archive
of All Siren Activity
- Selective
Printouts for Status by Siren Location or Date
COMPUTER
REQUIREMENTS
PC with 486DX or Higher CPU
WINDOWS®
95
or 98
CD-ROM
Drive
Comm.
Port
Hard Disk Space Required: 8 MB
PRINTER OPTIONS:
Optional. 9 pin, dot
matrix, 120 CPS, tractor feed, with parallel cable. Designed to be used with an Okidata #184 printer.
COMMUNICATIONS:
- Transmitter
Connection: (Typical 1 of 2 transmitters)
- Squelch
- Push to Talk
- (N.O., N.C.
Contacts)
- Transmit Audio
- Receive Audio
- Channel Grant
Active (for Trunking)
- Signaling: DTMF
2 of 8 Format. 10 Digit Transmit.14-18 Digit Receive.
- Tone Level:
Audio Level Adjustable.
- Transmitter Delay: User Selectable Delay Times.
DIMENSIONS:
Height: 3”
Width: 17”
Depth: 9”
Weight: 4.5 lbs.
ELECTRICAL:
120 or 240 VAC, UL
Listed, Wall Mount Transformer.
ORDERING
INFORMATION:
·
E2010
-Central Station Control Unit.
·
E2010R
-Central Station Control Unit (Rack Mount).
·
E2010P
-Printer Option for Okidata #184 Printer and Cable.
·
E2010FSK -FSK Internal Option.
| 
