WPS-2903


From hss Engineering

Output: 119 dBC at 100’ (30m)
Tone coverage: 6,200’ (1880m)
Giant Voice® coverage: 3,100’ (940m)

WPS 2903:
Mass Notification Warning System
Whelen’s All-Hazard WPS2900 series omnidirectional high-power voice and siren systems deliver clear, powerful voice and siren communication.

SYSTEM FEATURES:

  • WPS2903 - Three Omni-Directional Speaker Cells Assembled in a Vertical Column
  • Two Compartment (Type II) Natural Finish Aluminum Cabinet
  • 119dBC @ 100’
  • WPS2903 Speaker Cells Include Three High Efficiency 400 Watt EZ-PULLSpeaker Drivers
  • 50’ (15m) Cable Included
  • Public Address Capability
  • Battery Powered, Minimum of 30 Minutes of Full Power Output with Batteries of our Recommendation
  • AC Temperature Compensated 10 Amp Battery Charger
  • Local Controls or Remote Controls
  • Three Power Amplifiers
  • Electronic Siren Controller
  • Tone Generator
  • Timer
  • Local Control Push Buttons
  • Battery Switch
  • SI TEST®
  • Separate Battery Compartment
  • Lightning Arrestor
  • Six Standard Public Warning Tones -Wail, Whoop, Attack, Hi-Lo, Alert, Airhorn

SYSTEM OPTIONS:

  • SBC280 - Solar Power*
  • CTV110 - 12V 110Ah Batteries
  • WPSNCMIC - Noise Cancelling Microphone
  • Alternate Tone Set
  • RDVM - Digital Voice Message Capability**

NOTES:
*Solar power option includes 2 - 80 watt panels, mountingbracket and regulator
**RDVM - 1-16 message capability with 240, 480 or 960 seconds
available for recording

SIREN ACTIVATION CONTROL:
Our VHF High and UHF Wide-Band siren activation control packages include the following:

  • Radio
  • Radio Interface
  • Tone Squelch
  • 2-3dB Gain Omni-Directional Antenna with Bracket
  • 15 m of RG213 Antenna Cable
  • Polyphaser
  • SI TEST®
  • Low Battery Alarm (Two-Way only)

Other features are dependant upon one or two way controls. Whelen equipment can be interfaced with many different types of two-way radio communications products and systems including 800Mhz trunking, Motorola’s MOSCAD, FSK, Narrow-Band and VHF Low Band. The following is available as standard options. Contact factory for special applications.

ONE-WAY CONTROLS:

  • AUXIN - Auxiliary Board for Contact Closure Activation
  • D2020LL - 10 Digit DTMF Landline Activation
  • D2020H - 10 Digit DTMF VHF High Band / 150-170 Mhz
  • D2020U - 10 Digit DTMF UHF / 450-470 Mhz
  • WPSTT - Two-Tone Sequential Option

TWO-WAY CONTROLS:

  • AUXCS - Two-Way Contact Closure Activation and Status Board
  • C2020LL - Two-Way Landline Activation
  • C2020H - 10 Digit DTMF VHF High Band /150-170 Mhz
  • C2020U - 10 Digit DTMF UHF / 450-470 Mhz
  • C2020NH - 10 Digit DTMF VHF High Band Narrow-Band
  • C2020NU - 10 Digit DTMF UHF Narrow-Band

OPTIONS:

  • FSKXMOD - Converts the Above Siren Activation Controls to FSK Format
  • STATUS - Cabinet Window LED Status Indicator
  • PGINT - Paging Interface to Interface Whelen Tones with Existing Paging Systems
  • INTRU - Intrusion Alarm (available with two-way only)

SPECIFICATIONS:

Component Height
cm (inches)
Width
cm (inches)
Depth
cm (inches)
Weight
kg (lbs)
WPS2903
SPEAKER
110.5 (43.5) 82.5 (32.5) 88 (194)
ELECTRONICS
CABINET
TYPE II
103 (40.7) 76 (30.0) 25.4 (10.0) 54 (117)

ELECTRICAL:

  • Battery Charger Input: 120VAC, 60Hz, 7A fuse (240 VAC 50/60 Hz available)
  • Battery Charger Output: 28VDC, 10A (NOMINAL)
  • Batteries: (2) 12V, 110AH sealed lead calcium
  • Standby Current: 135mA, 24VDC
  • Operating Current: 67A, 24VDC
  • Power Amplifier Output Power: Siren: 1200 Watts, Voice: 1500 Watts

ENVIRONMENTAL:
Operating Temperature: -35°C to +60°C
Storage Temperature: -65°C to +125°C
Humidity, Non Condensing: 0 to 95% 

ACOUSTIC PERFORMANCE:
SPL @ 100’: 119dBC
Estimated 70dB range: 3,100’
Estimated 60dB range: 6,200’

Note: 100’ performance levels listed represent repeatable results within +/-2dB to stated levels. Estimated 70dB perimeter is based on the Federal Emergency Management Agency’s (FEMA) -10dB per distance doubled path model.

ORDERING INFORMATION:
BASIC SYSTEM INCLUDES ALL OF THE FOLLOWING:

  • WPS2903 - Speaker Assembly & Electronics Cabinet

OPTIONS:

  • CURRENT - 120VAC or 240VAC
  • RDVM - Remote Station Digital Voice.*
  • AUXIN - Auxiliary Board for Contact Closure Activation
  • AUXCS - Auxiliary / Status Control Board for Contact Closure Activation and Status
  • D2020LL, D2020H, D2020U - One-Way Radio Control.**
  • C2020LL, C2020H, C2020U - Two-Way Radio Control / Status Monitoring, COMM/STAT™.**
  • C2020NH, C2020NU - Two-Way Narrow Band Radio Control / Status Monitoring, COMM/STAT™.**
  • WPSTT - Two-Tone Sequential
  • FSKXMOD - FSK Format
  • STATUS - Cabinet Window LED Status Indicator
  • PGINT - Paging Interface to Interface Whelen Tones with Existing Paging Systems
  • INTRU - Intrusion Alarm
  • SBC280 - Solar Power***

NOTES:
*RDVM - 1-16 message capability with 240, 480 or 960 seconds available for recording

**10 digit DTMF Controls, Landline, VHF High Band / 150-170 Mhz, UHF / 450-470 Mhz Our VHF High and UHF siren activation control packages include tone squelch, radio, radio interface, 2-3dB gain omni-directional antenna with bracket, 35’ of RG58 antenna cable and polyphaser
***Solar power option includes 2 - 80 watt panels, mounting bracket and regulator.

Datasheet (in pdf)

Installation manual (in pdf)

Operation manual (in pdf)

Get Acrobat Reader